| Customization: | Available |
|---|---|
| Feature: | Photodegradable |
| CAS No.: | 200-815-3 |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-impact polystyrene(HIPS)
High-impact polystyrene, also known as HIPS, is a thermoplastic material made of elastomer-modified polystyrene. The two-phase system composed of a
rubber phase and a continuous polystyrene phase has developed into an important polymer product in the world. This general product has a wide range of impact properties and processing properties, making it widely used ,Such as used in automobiles, appliances, electric products, furniture, household appliances, telecommunications, electronics, computers,disposable products, medicine, packaging and entertainment markets.
HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.
Properties:
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good
LDPE
Low density polyethylene(LDPE): is the lightest kind of polyethylene resin. It has high fluidity and good processability. It is suitable for being used in all types of thermoplastic processing processes, such as injection molding, extrusion molding, blow molding, rotomolding, coating, foaming, thermoforming, hot-jet welding and thermal welding.
Polypropylene Granules (PP)
PP(Polypropylene)granules is a nontoxic, odorless, odorless, tasteless, creamy, high crystalline polymer with a density of only 0.90 --" 0.91g /cm3, "one of the lightest plastics available. It is particularly stable for water, with a water absorption rate of 0.01% and a molecular weight of about 81,150,000. Good molding performance, but due to large shrinkage rate (1%~2.5%), thick wall products are easy to sag, it is difficult to meet the requirements for some parts with high dimensional precision, and the surface of products is glossy.
PE
PE Granules it is a thermoplastic resin polymerized ethylene obtained. In the industry, but also copolymers of ethylene with minor amounts of α-olefins. Polyethylene odorless, non-toxic, feel like wax, has excellent low temperature properties (lowest temperature up to -100~ -70 ° C), good chemical stability, resistance to most acid-base erosion (impatience with oxidation the nature of the acid). Room temperature, not soluble in common solvents, water absorption, excellent electrical insulation.
| Parameter | Grade | ||||
| Standard: GB5761-1993 | SG3 | SG5 | SG7 | SG8 | |
| K - Value | 72 - 71 | 66 - 68 | 62 - 60 | 59 - 55 | |
| Polymerizing Index | 1300 +/-50 | 1000 +/-50 | 800 +/-50 | 700 +/-50 | |
| Number of impurity particles ( ≤) | 16 | 16 | 20 | 20 | |
| Volatile content (incl. water) (% ≤) | 0.3 | 0.4 | 0.4 | 0.4 | |
| Apparent density (≥) | 0.42 | 0.48 | 0.48 | 0.5 | |
Particle size |
≥ 0.25mm ≤ | 2 | 2 | 2 | 0.4 |
| ≥ 0.063mm ≥ | 95 | 95 | 95 | 95 | |
| Number of Fish Eye (/400 cm2) (≤) | 20 | 20 | 30 | 30 | |
| Plasticizer absorption of 100g resin ( ≥) | 26 | 19 | 12 | 22 | |
| Whiteness (160°C, after 10 min.) (% ≥) | 78 | 78 | 75 | 75 | |
| VCM Residue PPM ( ≤) | 5 | 5 | 5 | 5 | |
Mainly used for transparent films, soft and hard tube, cables, wires, coated products, foam products, construction pipe and profiles, plates, doors and windows, films etc. Also can be used with injection molding mode to produce plastic sandals, soles, slippers, toys, and other daily necessities and automotive and electrical accessories.PP PE PVC
1. Are youtrading company or Manufacturer ?
We are factory.
2.About Sample
We provide samples, but you need to pay the sample fee and freight.
3. About Material
We can customize the material according to customers' requirement.
4. About Quality
All the products must be tested strictly according to the testing procedure before shipment.
5. About Delivery Period
Normally delivered in 21 working days after the confirmation of order& payment. And it varies according to the material and
quantity.
6. About Payment term
It's flexible, T/T, L/C at sight,100% in advance,30% in advance, the balance by copy B/L
){kind=link}